BOMB COUNTDOWN

Guides

How to use a bomb countdown timer

The whole tool takes about a minute to learn. Set a time, press play, and the bomb lights up with a fuse that burns down while the clock counts. Here is how to set it up for a real event, how to put it on a TV and how to drive it from your phone.

What you get when you open the timer

Nothing to install, no account, and the countdown keeps working without a connection as long as the page stays open.

Set the time and start the countdown

  1. Type the hours, the minutes and the seconds in the three boxes in the navbar. The clock on the bomb follows them as you type.
  2. If you use a round length every week, open the Presets menu and pick one instead.
  3. Press the green play button. The bomb lights up, the fuse starts burning and the clock counts down.
  4. Press it again to pause, and the reset button to go back to the time you set.
  5. Open the Configuration menu and decide what you want to hear. Turning the bomb sounds off is the first thing to do in a quiet room.

There is one thing worth knowing about the pre-countdown. By default the timer gives a three, two, one warning before the clock starts, which stops a round from starting while somebody is still reading the question. Switch it off in the Configuration menu when you do not want it.

Put the timer on a TV

  1. Open the timer on the laptop and connect the laptop to the TV or the projector with HDMI.
  2. Press the fullscreen button in the navbar. The screen shows the bomb, the fuse, the clock and the subtitle, with no menus and no cursor.
  3. Press the browser's own fullscreen shortcut as well if you want the laptop screen to go dark.
  4. Type the round name in the subtitle so the room knows what the clock is counting down to.

The party countdown timer page has a few ideas for what to count down during a night, and the event timer page covers the cases where the schedule has to be respected to the minute.

Connect the phone remote

  1. Press the remote button in the navbar. A dialog opens with a QR code and a link.
  2. Scan the code with the phone camera, or type the link on the phone.
  3. The phone opens the control page and joins the room automatically.
  4. From the phone you can start, pause, add or subtract time, reset, set an exact countdown and change the subtitle.
  5. When the night is over, press Stop sharing on the screen. The room closes and the phone stops controlling it.

The countdown runs on the screen and does not need internet. The phone remote does, because the phone and the screen talk to each other through a small relay on the server. On a wifi network with no signal, the clock keeps counting but the remote will not respond.

Change the subtitle and the sounds

The subtitle is the line under the clock, and it starts as TIME TO EXPLODE. Open the Configuration menu and choose Edit bomb subtitle to change it. Use it for the round name, the question number, the name of the player on the hot seat or the name of the act that is about to start.

The sound options are in the same menu. Bomb sounds off silences the explosion and the fuse loop, click sounds off silences the ticking when you set the time, and the pre-countdown switch decides whether the three, two, one warning plays.

When something does not behave

Problem What to do
The TV shows only the desktop The browser is not in fullscreen. Press the fullscreen button in the navbar of the timer.
The phone does not connect Check that the phone is on the same wifi and that the phone can reach the internet. The remote needs a connection, the countdown does not.
The remote shows a disconnected message Stop sharing on the screen and scan the QR code again. The room is closed when the bomb stops sharing.
The explosion is too loud Open the Configuration menu and tick Bomb sounds off. The visual explosion stays.
The clock jumped or the fuse disappeared Reset the timer. If the window was resized, the fuse is redrawn from scratch, which is normal.
The countdown stopped Closing the tab stops the countdown, because the timer lives in that tab. Leave it open and use fullscreen.

Frequently asked questions

How do I set a countdown timer?

Type the numbers in the hours, minutes and seconds boxes in the navbar and press the green play button. If you use the same length every week, the Presets menu has five minutes, ten minutes, fifteen minutes, twenty five minutes, thirty minutes, one hour and longer options ready to click.

How do I put the timer on a TV?

Open the timer on the laptop, connect the laptop to the TV with HDMI and press the fullscreen button in the navbar. The screen will show the bomb, the fuse and the clock only, which is what you want when the whole room is watching.

How do I control the countdown from my phone?

Press the remote button in the navbar, scan the QR code with your phone and the phone becomes the remote. From there you can start, pause, add or subtract time, reset, set an exact countdown and change the subtitle. The phone needs internet for this, the countdown itself does not.

What is the pre-countdown for?

It gives the room a three, two, one warning before the clock starts, so a round does not start while somebody is still finding their seat or reading the question. You can switch it off in the Configuration menu if you do not need it.

How do I turn the explosion sound off?

Open the Configuration menu in the navbar and tick Bomb sounds off. There is also a separate switch for the click sounds, and the fuse sound can be left on while the explosion is silenced. Nothing else changes, the countdown still counts down and still explodes visually.

Support

If you like this countdown timer, take a look at these illustrated products. I am also a fantasy illustrator and every print you buy keeps these free tools online.

More ways to support

Premium illustrated products, prints and merch.